top of page
Sewage Filtration
SW450_Hero_2-300x300.png

SF450 FLUX CHAMBER SAMPLER

The Perfect Sampler for Both Land and Water

The Scentroid Flux chamber sampler (a.k.a. Emission Isolation Flux Hood) is used to determine levels of emissions from solid or liquid surfaces 

Most Utilized Industries

SM100i_beingUsed_Landfill.jpg

Wastewater

Livestock & Agriculture

Landfill & Compost

Screen Shot 2022-08-16 at 12.37_edited.png

Built for Solid and Liquid Surfaces

The flux chamber has been designed for both solid and liquid surface sample collections

Screen Shot 2022-08-15 at 9.30_edited.png

Stainless Steel Fitting

Stainless steel fitting for clean air sampling, relief flow, and temperature probes

Screen Shot 2022-08-09 at 9.06_edited.png

Stainless Steel

Chamber is made of 100% stainless steel construction – both parts and casing

Screen Shot 2022-08-16 at 10.57_edited.png

Extra Fitting

Extra fitting available for thermo-couple probe (sold separately)

Screen Shot 2022-08-16 at 12.38_edited.png

Flotation Device

Stainless steel unit floats without the need of foam or rubber tubes for liquid sampling

Screen Shot 2022-08-16 at 12.38_edited.png

Chain Handle

The Scentroid Flux Chamber comes equipped with a chain handle and a hoist ring for easy movement and transportation

Related Products

Flux Chamber Sampler Overview

The Scentroid Flux chamber sampler (AKA Emission Isolation Flux Hood) is used to determine levels of emissions from solid or liquid surfaces. The SF450 has a 100% solid stainless steel construction to ensure zero cross-contamination. Flotation is achieved using 4 stainless steel floats eliminating the need for rubber tubes or foam making the unit easy to clean and maintain.

Flux Chamber Sampler Applications

  • Emission measurements from liquid surfaces such as settling tanks and off-spec ponds

  • Emission measurements from solid surfaces such as compost piles and sludge

  • Emission measurement from liquid active sources such as aerated lagoons

  • Ideal for the sampling of corrosive sources e.g. with high benzene or H2S content

  • Ideal for field operations that require quick decontamination

Flux Chamber Sampler Basics of Operation

  • Connect the flux chamber sampler sweep airline to either nitrogen or zero air cylinder

  • Move the flux chamber sampler to the sampling location

  • Allow time for the 2 air exchanges inside the chamber

  • Extract sample using a vacuum chamber

  • For aerated liquid sources, an air sweep may not be required

Flux Chamber Sampler Basics of Operation

  • Emission measurements from liquid surfaces such as settling tanks and off-spec ponds

  • Emission measurements from solid surfaces such as compost piles and sludge

  • Emission measurement from liquid active sources such as aerated lagoons

  • Ideal for the sampling of corrosive sources e.g. with high benzene or H2S content

  • Ideal for field operations that require quick decontamination

Features

Construction: 450 mm (17″) diameter with an enclosed surface area of 0.1555 sq meters (240″ squared)
Material: All stainless steel construction including floaters for optimal decontamination
Fittings: Standard fittings designed for 1/4″ or 12mm OD PTFE tubing for a sweep and sample air (custom fitting sizes available)
Additional Fittings: More fittings available for pressure/temperature sensors (specified at the time of ordering)
Port: Dedicated pressure relief port 

bottom of page