top of page
Sewage Filtration
SM100_Much_Higherres_without_dither-oi9rvxdpiqdealrj9mf78m82ycbgw57jn0w8wz1wfk.png

SM100 PORTABLE OLFACTOMETER

In-Field Odour Measurement

The world’s most accurate in-field odour measuring device, allowing users to quantify ambient odour strength in OU/m3

Industries

scentroid_edited.png

On-Site Package

With an additional on-site package, you’ll receive all 5 calibration plates, a 2nd air tank, durable carrying case, fill station, and a sample port adaptor

Screen Shot 2022-08-12 at 6.31_edited.png

Upgrade Available

Ability to upgrade to the SM100i, which removes the manual adjustment of dilution steps..

Screen Shot 2022-08-12 at 4.25_edited.png

Air Supply Capability

20 minutes per tank of air, allowing for 15-20 samples per tank

Screen Shot 2022-08-12 at 6.27_edited.png

Light and Portable Design

The reduced size and weight of the SM100 Portable Olfactometer ensures that you can take it along on any odour adventure!

Screen Shot 2022-08-12 at 6.28_edited.png

Dilution Range

2 to 30,000, using 15 adjustable dilution steps. The SM100 portable olfactometer has been designed for accuracy above all

Screen Shot 2022-08-09 at 9.07_edited.png

Unparalleled Reliability

All parts have been meticulously tested using Scentroid’s iso9001 certified quality management system

Related Products

Overview of SM100 Portable Olfactometer

Scentroid’s SM100 portable olfactometer is the world’s most accurate in-field odour measuring device that allows users to accurately quantify ambient odour strength in OU/m3. This revolutionary device offers an easy-to-use and cost-effective alternative to estimating odour strength or using expensive odour measuring laboratories. Plus, using the SM100 helps to avoid sample degradation caused by shipping (time, temperature, and pressure) to the nearest lab.

Each SM100 draws a sample of ambient air via a Venturi pump and dilutes it using fresh, odourless air from a compressed air tank. The operator uses an adjustable sliding valve to control the ratio of fresh to ambient air, which is then fed through a sliding valve into the PTFE face mask. The valve position indicator displays the sample strength (Dilution to Threshold or OU). The SM100 requires no sample bags, no filters to change, no pumps or other moving parts to maintain.  Truly an instrument you can rely on.

Use the SM100 Portable Olfactometer to:

  • Perform daily odour assessments and identify their sources

  • Determine odour mitigation effectiveness
    Evaluate the odour emission impact on nearby residents

  • Monitor emission compliance and conduct N-Butanol screening

Conduct Odour Measurements From

  • Ambient air without any additional sampling equipment

  • Smokestacks or filter inlets directly

  • Flux chambers

  • Air samples in PTFE/Tedlar bags

Upgrade to SM100 Portable Olfactometer Available

Dilution

Dilution Range (Ou/m3): 2 – 30,000 (2^15)
Dilution Principle: Stainless steel educator
Number of Dilution Steps: 15 (adjustable range)

Air Flow

Air Supply Capacity: 15 minutes
Pressure Flow Rate: 20 litres per minute
Presentation Face Velocity: 0.3
Tank Pressure: 4500 PSI 

Hardware

Face Mask: Half face PTFE
Wetted Material: Stainless steel and PTFE 
Power Requirements: None
Dimensions: 16″ x 6″ x 6″ x 8 lbs

bottom of page