top of page
Sewage Filtration
TR8_Plus_2_Fix-1-on1sdpnv0u0sk44qq2p7l7xoyk7dn7fmqlsxd7slkw.png

TR8 PLUS
POLLUTRACKER

Air Quality Monitor and Chemical Analyzer

The Scentroid Pollutracker is a complete air quality monitor and mobile laboratory capable of measuring ambient air quality & greenhouse gases, with up to 10 sensors and analyzers

Most Utilized Industries

scentroid_edited.png

Detection Threshold

Pollutracker measures chemicals close to the detection threshold at parts per billion (ppb) levels

Screen Shot 2022-08-12 at 6.31_edited.png

Companion Equipment & Sample Bags

TR8 Plus Pollutracker works great with our personal olfactometer SM100i, allowing user to record concentrations as well as detected vapours. Works great with PTFE, Tedlar, or Nalophan bags

Screen Shot 2022-08-12 at 4.25_edited.png

Automated Data Logging

Every Pollutracker provides automated continuous chemical, GPS position, temperature, and humidity data logging

Screen Shot 2022-08-12 at 6.31_edited.png

Increased Safety

By providing a constant reading of ambient air, users will receive added protection from over-exposure to chemical vapours

Screen Shot 2022-08-12 at 6.28_edited.png

Reporting Standards

Traceable back to international standards: e.g. USEPA (40 CFR part 53) and EU (2008 / 50 / EC)

Screen Shot 2022-08-09 at 9.07_edited.png

Manage Odour Losses

Laboratories can manage odour degradation through sample transportation and storage by analyzing values live and in-field instead

Related Products

TR8 Plus Pollutracker Overview:

The Scentroid TR8 Plus Pollutracker is a complete air quality monitor and mobile laboratory. Users can measure ambient air quality & greenhouse gases due to it using up to 10 sensors and analyzers including photo-ionization detectors (PID) sensors, non-dispersive Infrared (NDIR) sensors, electrochemical and metal oxide sensors, amongst others. Each Pollutracker includes a built-in 10″ touchscreen interface, on-device data logging, wireless transfer via email, remote (internet-based) firmware updates, built-in sampling pump, simultaneous data analysis of gases, built-in rechargeable battery, and an on-screen calibration procedure.

Pollutracker TR8+ Applications

  • Measure ambient H2S, Ammonia, Total VOC, and other chemical concentrations
    Determine H2S, Ammonia, VOCs, and other chemicals emissions from various types of sources

  • Determine emission trends through 24+ hour data logging

  • Verify sample loss due to transportation

  • Validate dispersion models through emission measurements 

Pollutracker TR8+ Capabilities:

  1. The Scentroid Pollutracker includes a sampling pump with an adjustable sampling rate, up to 10 chemical sensors that are specified at the time of ordering, and Scentroid’s Pollutracker Application that can be loaded to any customer supplied Android phone/tablet. For each sample location, Scentroid instantaneously records:

  2. The concentration of up to 10 chemical vapours in ppm or ppb depending on sensors ordered

  3. Measure Temperature and Humidity

  4. Record GPS position of each measurement

  5. Measure directly from ambient air

  6. Can record continuously for remote monitoring via Bluetooth

  7. TR8 Plus Pollutracker can also be used as the perfect tool for flue analysis. Using the TR8 plus can provide an effective way to gather reliable combustion data through the measuring of temperature, oxygen, and carbon dioxide. *Make sure the usage purpose is specified at time of ordering, to allow the Scentroid staff to create the perfect combination of sensors for your needs.

Flexible and Cost-Effective Solution

The Scentroid Pollutracker Plus builds on the established Odotracker by providing an extended number of sensors. This instrument can measure all common contaminants including SO2, CO, CO2, H2S, Methane, VOCs, Ethelene, PM2.5, PM10, and more. The chemicals and the range are selectable at the time of ordering.

Pollutracker TR8+ Basics of Operation:

  • Connect to Pollutracker via Bluetooth
    See chemical readings live

  • Take snapshot readings of H2S, Ammonia, VOCs, another chemical compositions, GPS position, temperature and humidity.

  • Activate recording for continuous data logging

  • Export data for reporting and post analysis

Sensors

Maximum Sensors: 10 (Click here for full sensor list)
Type of Sensors: PID, NDIR, EC, laser particulate counter

Sampling

Sampling Rate: Adjustable from 1/s to 1/m
Sampling Ports: 1 to 2
Sampling Range: Range depends on active sensors
Initiation Time: 5 minutes to 6 hours depending on sensors
Settling Time: 0.5 seconds to 8 seconds depending on sensors
Pressure Range: 80 – 120 kPa
Additional Parameters Measured: Temperature, relative humidity, GPS position 

Power

Battery Life: 24 hours

Communications

Communication: Bluetooth connection with any android device

Temperature

Temperature Range: -30 to 50 °C 
Humidity Range:  15 – 90% relative humidity

Calibration

Manual Calibration: Using calibration gas and on-board screen
Automatic Calibration: Optional, using built-in calibration gas

Warranty

Warranty: 24 months full warranty on all parts including sensors
Sensor Replacement: Sensor dependent; the first 2 years are covered by a warranty

Hardware

Casing: Heavy duty pelican case ensures components are kept safe
Weight: 15 lbs

bottom of page